100A RoHS IEC UC Approval Atching Relay with Mini Motor

100A RoHS IEC UC Approval Atching Relay with Mini Motor

Standard Knowledge Dimension(mm) 29×25×27.one
Fat ( g ) eighty
Contact Arrangement 2A/2B
Get in touch with Materials AgSnO2
Ambient Temperature -45~+85ºC
Vibration 10~50Hz,.075mm
Shock 1000m/s²,(100g)
Specifications Info Nominal Voltage nine~36VDC
Power Consumption <2W
Operating Voltage 7.2V
Max. Motor Voltage 24V
Max. Switching Existing 100 A
Surge Current 6000A/10ms
Motor Resistance(R±20%) 30Ω
Get in touch with Score(Res) 250VAC,100A
Get in touch with Voltage <60mV
Contact Resistance <0.6mΩ
Dielectric Power Motor to Get in touch with >4000VAC   1min
Throughout Open Speak to >2000VAC   1min
CZPTal Lifestyle >10000
Mechanical Daily life >100000
Pulse Time 40ms~60ms
Selecting-up Time <65ms
Release Time <65ms
Off Contact Length ≥0.8mm
Insulation Resistance >1000MΩ(500VDC)

           Cautions of Latching Relay:
             1.Suggestions of relay’s enter
            (one)Polarity-You should verify the polarity within of our technological specification, if solitary coil then”+ -” or “- +”are good,

            you can change it by a single pulse.If double coil then it is required to confirm “-+-” or “+-+”just before leaving the our factory.

            (two)Driving-Make sure you energize the relay at our recommend pulse width, rated voltage for reputable performance, if 1.five

            occasions or 2 moments of price or lower driving situation plz validate with our engineer.
            (3)Relays’contact standing may possibly be altered during transportation or set up due to effect of exterior pressure,
            consequently you should reset to the needed position.


            2.Suggestions of relay’s output
            (1)When selecting the relay with hard connection,remember to stay away from the external power on load terminals throughout or right after

            the installation.

            (2)When the relay will be connected with screw or bolts to the relays’ terminals, plz make positive your link is

            fixed and avert relay from damages or other safety troubles thanks to temp. Rise..

            (3)The sampling signal wires of products are minimal, make sure you do not pull or torque throughout installation.

100A RoHS IEC UC Approval Atching Relay with Mini Motor

Gear Motor

As one of the gear motor manufacturers, suppliers, and exporters of mechanical products, We offer gear motors and many other products.

Please get in touch with us for details.

Manufacturer supplier exporter of gear motors.

Recent Posts