Product attribute:
1. Stator size is optional
two. Safe, trustworthy, low noise, excellent starting, prolonged daily life
three. Sturdy electrical power
Rated voltage 110~120V/220~240V-50/60Hz
Standard employed:
Compact large-functionality admirer motor utilised on Refrigerator, Ice Chest, Condensing plant, Ventilator And so on
1. Stator measurement: 82*25mm
2. Speed: 1750RPM
three. Safe, trustworthy, lower sounds, very good commencing, long daily life
Machanical parameter:
Voltage(V): one hundred ten-240
Frequency: 50/60Hz
Existing(A): .75
Input Power: 70W
Torque: 100mN. M
Shaft diameter(mm)=four-6mm
Shaft size(mm)=according to customer’s prerequisite
Velocity(r/min)=according to customer’s need
Recent(A)=in accordance to customer’s necessity
Input electrical power(W)=in accordance to customer’s prerequisite
Model | STATOR Dimensions | SHAFE DIA | VOLT | Enter Electrical power | TORQUE (g.cm) | Speed RATED |
YJ8213 | 13mm | 5mm | one hundred ten-240V | 40W | 80.51mN.m | 1550RPM |
YJ8216 | 16mm | 6mm | 110-240V | 50W | eighty five.82mN.m | 1500RPM |
YJ8219 | 19mm | 7mm | 110-240V | 65W | 100mN.m | 1650RPM |
YJ8225 | 25mm | 7mm | one hundred ten-240V | 70W | 118mN.m | 1750RPM |
YJ8230 | 30mm | 8mm | a hundred and ten-240V | 85W | 150mN.m | 1800RPM |
ABOUT US
Ritscher team was set up in 2006.we constantly focus on micro-motors for house electrical appliance and market appliance considering that setting up.at the moment we have two professional micro-motor factories in China which severally located in HangCZPT town and HangCZPT metropolis.it has an spot of 25,000 sq. meters vegetation and a lot more than three hundred workers, once-a-year output is 3 million pcs and has 5 million pcs yearly creating potential.right after several a long time development,we had constructed a excellent reputation in the marketplace and obtained a lot more and much more customers’ trust in the entire world.
We started from shaded pole motors at starting, up to now,our solution included of shaded pole motors,synchronous motors,stepping motors ,capacitor motors, BLDC motors, DC motors and compressors. Our merchandise are commonly utilised for producing fridges, freezers, micro-wave ovens, air warmers, air exhausters, ventilators,ovens, air filter, therapeutic massage machines and numerous other equipments.
As a realiable good quality warranty,Ritscher has full R&D departement,QC division,producing department,purchase section and so on. has ideal creating products like Aluminum diecasting, Zinc diecasting, Sheet metallic stamping, CZPT injection molding etc. also test/ detection device like multiplex temp measuring system, efficiency parameter inspection device, Phenol peptide resolution pinhole tester,Anechoic place and so on.
Endeavoring to provide the ideal item and service to customers,we always do the most effort to turn into an excellent manufacturer of micro motors.
Ritscher is usually ready to establish sincere company partnership with pals from all over the planet.
Welcome make contact with with us!
Get ritscher ,get pleasure from modern day existence!
Our company FAQ for you
(one) Q: What variety motors you can give?
A:For now,we mainly offer Kitchen Hood Motor,DC Motor,Equipment Motor,Enthusiast Motor Refrigerator Motor,Hair Dryer Motor Blender Motor Mixer Motor,
Shade Pole Motor,Capacitor Motor,BLDC Motor PMDC Motor,Synchronous Motor,Stepping Motor etc.
(2) Q: Is it feasible to go to your manufacturing unit
A: Positive. But remember to kindly maintain us posted a number of days in progress. We need to check our
timetable to see if we are CZPT then.
(three) Q: Can I get some samples
A: It relies upon. If only a handful of samples for personal use or replacement, I am frightened it will
be difficult for us to offer, because all of our motors are personalized manufactured and no stock
CZPT if there is no even more wants. If just sample screening before the formal buy and
our MOQ, price and other conditions are satisfactory, we’d really like to offer samples.
(four) Q: Is there a MOQ for your motors?
A: Indeed. The MOQ is among a thousand~10,000pcs for various designs following sample approval.
But it is also ok for us to take smaller heaps like a couple of dozens, hundreds or countless numbers
For the first 3 orders right after sample approval.For samples, there is no MOQ prerequisite. But the less the greater (like no much more than 5pcs) on issue that the amount is sufficient in situation any changes essential after first testing.