China Standard Permanent Magnet AC Gear Motor for Automatic Industrial with High Efficiency and Maintenance-Free vacuum pump oil near me

Product Description

20-Year-Experience HangZhou Magnet Manufacturer

Free Samples and Trial Orders are Welcomed

ISO Certificated & SGS Verified Magnetic Products Supplier

 

Product Description
 

Product name Neodymium Magnet
Material Sintered Neodymium-Iron-Boron (NdFeB)
Grade & working Temperature Grade Max. Operating Temperatures
N35-N55 80°C (176°F)
N35M-N54M 100°C (212°F)
N35H-N52H 120°C (248°F)
N35SH-N50SH 150°C (302°F)
N28UH-N48UH 180°C (356°F)
N28EH-N45EH 200°C (392°F)
N28AH-N42AH 230°C (446°F)
Size Customized size 
Shape Customized (block, disc, cylinder, bar, ring, arc, countersink, segment, hook,etc)
  Customised (Ni, Zn, Epoxy, Gold, etc)
Size tolerance ±0.05mm for diamater/ thickness, ±0.1mm for width/ length
Density 7.5-7.6g/cm³
Magnetization Magnetized through thickness, axially magnetized, diametrically magnetized, multi-poles
Applications Neodymium magnets are widely used in various fields, such as motors, sensors, electronics, microphones, wind turbines, wind generators, printer, switchboard, packing box, loudspeakers, magnetic separation, magnetic hooks, magnetic holder, magnetic chuck, etc.

 

Sintered Nd-Fe-B Magnets

The third generation of rare earth permanent magnet NdFeB is the most powerful permanent magnet in modern magnets. It not only has the characteristics of high remanence, high coercivity, high magnetic energy product, high performance-to-price ratio, but also is easy to be processed into various sizes. Now it has been widely applied in various fields. Especially suitable for the development of high-performance, miniaturized, lightweight alternative products.

 

 

 

Any size and performance can be customized according to requirements

 

Different Types of Coating for Neodymium Magnets

Our Factory

As a manufacturer of magnetic products with 20-year experience, Hawell Magnetics always focuses on enhancing the production capacity.

•Over 100 million magnetic products delivered to American, European, Asian and African countries each year, including Neodymium Rare Earth Magnets for Motors,Generators and Speakers, etc.

One stop service from R&D to mass production for all Rare Earth Magnets and Magnetic Products.

 

• So far, Hawell Magnetics has the following qualifications:
TS16949 certified
VDA 6.3 certified
ISO9001 certified
-ISO14001 certified
-SGS verified
-BV verified
-RoHS certified
-MSDS certified
-REACH certified
-Alibaba Gold Plus Supplier verified

Quality Control

1. Magnet will be inspected strictly during every process of production.
2. Every magnet will have a certificate before delivery.
3. Magnetic Flux report and Demagnetization Curve could be offered according to request.

Packing & Delivery

Our regular product packaging is shown as in the following pictures, which could be customized. If shims, N-Pole or S-Pole marks or other things are required, please contact us.
 

Application
 

Why Choose Us

Reviews from our customers:

FAQ

Q1: Can I have a sample order for Neodymium magnet?
A: Yes, we welcome sample order to test and check quality. Low MOQ of 1pc for sample checking is available.Mixed samples are acceptable. Please cover the freight.

Q2: What about the lead time?

A:Sample needs 3-5 days, mass production time needs 15~30 days for each order in general.

 

Q3: How do you ship the goods and how long does it take to arrive?

A: We usually ship by DHL, UPS, FedEx or TNT. It would take around 3-5 days to arrive. Airline and sea shipping are also available.

 

Q4: Is it OK to print my logo on magnet product or package?

A: Yes. Please inform us formally before the production and confirm the design firstly based on our sample.

 

Q5: How are Neodymium Magnets made?

A: The main ingredients are Neodymium, Iron and Boron. The exact ingredients depend on the grade being produced. We also add a key ingredient called dysprosium to raise the coercivity of the material and increase the resistance to demagnetisation and corrosion. You can read more about the manufacturing process in our company website, .

 

Q6: How do you make our business long-term and good relationship?

A: We keep good quality and competitive price to ensure our customers’ benefits. We respect every customer as our friend and we sincerely do business and make friends with them, no matter where they come from.

 

 

 

 

Application: Electronic Products, Speaker Magnet, Industrial Magnet, Solenoid, Motor Magnet
Shape: Arc
Coating: Nickel
Grade: N28UH-N40UH
Material: Rare Earth Neodymium Magnet
Lead Time: 30 Days
Samples:
US$ 50/Bag
1 Bag(Min.Order)

|

Customization:
Available

|

gear motor

Where can individuals find reliable resources for learning more about gear motors and their applications?

Individuals seeking to learn more about gear motors and their applications have access to various reliable resources that provide valuable information and insights. Here are some sources where individuals can find reliable information about gear motors:

1. Manufacturer Websites:

Manufacturer websites are a primary source of information about gear motors. Gear motor manufacturers often provide detailed product specifications, application guides, technical documentation, and educational materials on their websites. These resources offer insights into different gear motor types, features, performance characteristics, and application considerations. Manufacturer websites are a reliable and convenient starting point for learning about gear motors.

2. Industry Associations and Organizations:

Industry associations and organizations related to mechanical engineering, automation, and motion control often have resources and publications dedicated to gear motors. These organizations provide technical articles, whitepapers, industry standards, and guidelines related to gear motor design, selection, and application. Examples of such associations include the American Gear Manufacturers Association (AGMA), International Electrotechnical Commission (IEC), and Institute of Electrical and Electronics Engineers (IEEE).

3. Technical Publications and Journals:

Technical publications and journals focused on engineering, robotics, and motion control are valuable sources of in-depth knowledge about gear motors. Publications like IEEE Transactions on Industrial Electronics, Mechanical Engineering magazine, or Motion System Design magazine often feature articles, case studies, and research papers on gear motor technology, advancements, and applications. These publications provide authoritative and up-to-date information from industry experts and researchers.

4. Online Forums and Communities:

Online forums and communities dedicated to engineering, robotics, and automation can be excellent resources for discussions, insights, and practical experiences related to gear motors. Websites like Stack Exchange, engineering-focused subreddits, or specialized forums provide platforms for individuals to ask questions, share knowledge, and engage in discussions with professionals and enthusiasts in the field. Participating in these communities allows individuals to learn from real-world experiences and gain practical insights.

5. Educational Institutions and Courses:

Technical colleges, universities, and vocational training centers often offer courses or programs in mechanical engineering, mechatronics, or automation that cover gear motor fundamentals and applications. These educational institutions provide comprehensive curricula, textbooks, and lecture materials that can serve as reliable resources for individuals interested in learning about gear motors. Additionally, online learning platforms like Coursera, Udemy, or LinkedIn Learning offer courses on topics related to gear motors and motion control.

6. Trade Shows and Exhibitions:

Attending trade shows, exhibitions, and industry conferences related to automation, robotics, or motion control provides opportunities to learn about the latest advancements in gear motor technology. These events often feature product demonstrations, technical presentations, and expert panels where individuals can interact with gear motor manufacturers, industry experts, and other professionals. It’s a great way to stay updated on the latest trends, innovations, and applications of gear motors.

When seeking reliable resources, it’s important to consider the credibility of the source, the expertise of the authors, and the relevance to the specific area of interest. By leveraging these resources, individuals can gain a comprehensive understanding of gear motors and their applications, from basic principles to advanced topics, enabling them to make informed decisions and effectively utilize gear motors in their projects or applications.

gear motor

How does the voltage and power rating of a gear motor impact its suitability for different tasks?

The voltage and power rating of a gear motor are important factors that influence its suitability for different tasks. These specifications determine the motor’s electrical characteristics and its ability to perform specific tasks effectively. Here’s a detailed explanation of how voltage and power rating impact the suitability of a gear motor for different tasks:

1. Voltage Rating:

The voltage rating of a gear motor refers to the electrical voltage it requires to operate optimally. Here’s how the voltage rating affects suitability:

  • Compatibility with Power Supply: The gear motor’s voltage rating must match the available power supply. Using a motor with a voltage rating that is too high or too low for the power supply can lead to improper operation or damage to the motor.
  • Electrical Safety: Adhering to the specified voltage rating ensures electrical safety. Using a motor with a higher voltage rating than recommended can pose safety hazards, while using a motor with a lower voltage rating may result in inadequate performance.
  • Application Flexibility: Different tasks or applications may have specific voltage requirements. For example, low-voltage gear motors are commonly used in battery-powered devices or applications with low-power requirements, while high-voltage gear motors are suitable for industrial applications or tasks that require higher power output.

2. Power Rating:

The power rating of a gear motor indicates its ability to deliver mechanical power. It is typically specified in units of watts (W) or horsepower (HP). The power rating impacts the suitability of a gear motor in the following ways:

  • Load Capacity: The power rating determines the maximum load that a gear motor can handle. Motors with higher power ratings are capable of driving heavier loads or handling tasks that require more torque.
  • Speed and Torque: The power rating affects the motor’s speed and torque characteristics. Motors with higher power ratings generally offer higher speeds and greater torque output, making them suitable for applications that require faster operation or the ability to overcome higher resistance or loads.
  • Efficiency and Energy Consumption: The power rating is related to the motor’s efficiency and energy consumption. Higher power-rated motors may be more efficient, resulting in lower energy losses and reduced operating costs over time.
  • Thermal Considerations: Motors with higher power ratings may generate more heat during operation. It is crucial to consider the motor’s power rating in relation to its thermal management capabilities to prevent overheating and ensure long-term reliability.

Considerations for Task Suitability:

When selecting a gear motor for a specific task, it is important to consider the following factors in relation to the voltage and power rating:

  • Required Torque and Load: Assess the torque and load requirements of the task to ensure that the gear motor’s power rating is sufficient to handle the expected load without being overloaded.
  • Speed and Precision: Consider the desired speed and precision of the task. Motors with higher power ratings generally offer better speed control and accuracy.
  • Power Supply Availability: Evaluate the availability and compatibility of the power supply with the gear motor’s voltage rating. Ensure that the power supply can provide the required voltage for the motor’s optimal operation.
  • Environmental Factors: Consider any specific environmental factors, such as temperature or humidity, that may impact the gear motor’s performance. Ensure that the motor’s voltage and power ratings are suitable for the intended operating conditions.

In summary, the voltage and power rating of a gear motor have significant implications for its suitability in different tasks. The voltage rating determines compatibility with the power supply and ensures electrical safety, while the power rating influences load capacity, speed, torque, efficiency, and thermal considerations. When choosing a gear motor, it is crucial to carefully evaluate the task requirements and consider the voltage and power rating in relation to factors such as torque, speed, power supply availability, and environmental conditions.

gear motor

Can you explain the advantages of using gear motors in various mechanical systems?

Gear motors offer several advantages when utilized in various mechanical systems. Their unique characteristics make them well-suited for applications that require controlled power transmission, precise speed control, and torque amplification. Here’s a detailed explanation of the advantages of using gear motors:

1. Torque Amplification:

One of the key advantages of gear motors is their ability to amplify torque. By using different gear ratios, gear motors can increase or decrease the output torque from the motor. This torque amplification is crucial in applications that require high torque output, such as lifting heavy loads or operating machinery with high resistance. Gear motors allow for efficient power transmission, enabling the system to handle demanding tasks effectively.

2. Speed Control:

Gear motors provide precise speed control, allowing for accurate and controlled movement in mechanical systems. By selecting the appropriate gear ratio, the rotational speed of the output shaft can be adjusted to match the requirements of the application. This speed control capability ensures that the mechanical system operates at the desired speed, whether it needs to be fast or slow. Gear motors are commonly used in applications such as conveyors, robotics, and automated machinery, where precise speed control is essential.

3. Directional Control:

Another advantage of gear motors is their ability to control the rotational direction of the output shaft. By using different types of gears, such as spur gears, bevel gears, or worm gears, the direction of rotation can be easily changed. This directional control is beneficial in applications that require bidirectional movement, such as in actuators, robotic arms, and conveyors. Gear motors offer reliable and efficient directional control, contributing to the versatility and functionality of mechanical systems.

4. Efficiency and Power Transmission:

Gear motors are known for their high efficiency in power transmission. The gear system helps distribute the load across multiple gears, reducing the strain on individual components and minimizing power losses. This efficient power transmission ensures that the mechanical system operates with optimal energy utilization and minimizes wasted power. Gear motors are designed to provide reliable and consistent power transmission, resulting in improved overall system efficiency.

5. Compact and Space-Saving Design:

Gear motors are compact in size and offer a space-saving solution for mechanical systems. By integrating the motor and gear system into a single unit, gear motors eliminate the need for additional components and reduce the overall footprint of the system. This compact design is especially beneficial in applications with limited space constraints, allowing for more efficient use of available space while still delivering the necessary power and functionality.

6. Durability and Reliability:

Gear motors are designed to be robust and durable, capable of withstanding demanding operating conditions. The gear system helps distribute the load, reducing the stress on individual gears and increasing overall durability. Additionally, gear motors are often constructed with high-quality materials and undergo rigorous testing to ensure reliability and longevity. This makes gear motors well-suited for continuous operation in industrial and commercial applications, where reliability is crucial.

By leveraging the advantages of torque amplification, speed control, directional control, efficiency, compact design, durability, and reliability, gear motors provide a reliable and efficient solution for various mechanical systems. They are widely used in industries such as robotics, automation, manufacturing, automotive, and many others, where precise and controlled mechanical power transmission is essential.

China Standard Permanent Magnet AC Gear Motor for Automatic Industrial with High Efficiency and Maintenance-Free   vacuum pump oil near me		China Standard Permanent Magnet AC Gear Motor for Automatic Industrial with High Efficiency and Maintenance-Free   vacuum pump oil near me
editor by CX 2023-11-18

Gear Motor

As one of the gear motor manufacturers, suppliers, and exporters of mechanical products, We offer gear motors and many other products.

Please get in touch with us for details.

Manufacturer supplier exporter of gear motors.

Recent Posts