Portable 40kw Induction Heating Machine Induction Heater

Portable 40kw Induction Heating Machine Induction Heater

Transportable 30kw Induction Heating Equipment Induction Heater (JLCG-40)

 

    Principal Function

    • Ultrahigh series: high frequency, able to heat Φ 0.1mm work-piece.
    • Small size, light weight, low failure rate and conservation of energy. (which can save the power by 70% as compared with glass-ceramic vacuum tube high frequency heating machine)
    • It can ensure the solid welding point which is pleasing and delicate in appearance, integral geometric configuration, perfect surface grain, complete crystal structure of internal metal part, limited annealing range and elimination of obvious weld knot.
    • About ten types fault protection and display of over-current, over-voltage, water shortage and phase missing can provide higher reliability and durability.
    • It is applied to the welding of coupler and inserts used in metal glass manufacturing as well as electric appliance and electronics industries, non-contact welding of internal parts of small-size relays, high-pressure refrigerating parts, headwear decorations, metal ornamental articles an art wares.

    CZPT Parameters

    Product JLCG-40KW
    Enter electrical power wish 3 section 380V  50/60HZ
    Max oscillate electrical power 40KW
    Max input current 60A
    Oscillate frequency 50-200KHZ
    Cooling h2o want >0.3MPa≥6L/Min
    Obligation cycle one hundred% 40°C
    Proportions(L*W*H) Generator: 640*three hundred*550mm
    Transformer: 470*320*430mm
    Web excess weight 35kg/25kg
    Cable length 2-six(Meters)

      CZPT parts for JLCG-fortyKW Device

      Product Name of equipment or areas Specification Amount
      1 JLCG-40KW Generator one pcs
      two JLCG-40KW Transformer 1 pcs
      three Foot pedal  three main one pcs
      4 Induction Coil 2 sets
      5 Instruction Guide 1 pcs
      six Item catalog 2 sets

      Main Parts Introduction 

      • Germany SIEMENS INFINEON IGBT Module. ( 40-60KHZ oscillation frequency, fast response time, superhigh stability, almost spatter-free welding )
      • Japan Nichicon electrolytic capacitor. ( filter capacitor )
      • CZPTed transistor integrated block.
      • All water pipe use thermostabilityHigh pressure resistance best quality material.
      • Main card, signal circuit, drive circuit board,control circuit board and components are adopted:Toshiba, Hitachi,Motorola, China’s top manufacturers. 
      • CZPT advanced all-strong-state semiconductor power devices.
      • CZPT advantage:perfect control, alarm display circuit, getting full automatic tracking frequency, continuous adjustable power, safe dependable protection,clear and accuracy data display and etc.
      • Superiority Advantages: fast heating, wide application, small size, easy installation, simple operation, low power consumption, high efficiency.

      Photographs of Solution:

       

      Programs: Heat remedy, Welding, etc.
       

      1.Heat treatment method: such as Quenching, Annealing
          Heat therapy approach is the metal function-parts heated to a certain temperature, received diverse matrix group following various techniques of cooling, so that to achieve the necessary mechanical houses (content tougher or softer), this kind of as quenching, annealing, etc.
           Applications Examples: Shaft, Shaft core, Plate, Equipment, Sprocket, Steel belt, Device instrument add-ons, Xihu (West Lake) Dis. rail, CZPT tools, Tiny mould, Mildew equipment, CAM, Automobile and motorbike add-ons, Scissors, Yard shears blade, Chuck, mechanical components, Stainless steel goods, Cistern, Kitchen ware, Golf head, Clubs, Steel tube, Furniture fittings and Other related goods.

      two.Brazing, Welding, Soldering
          Brazing is a fusion and solidification process which refers to the use of magnetic subject induction heating to make the temperature of steel materials junction attain the melting position of welding, or the temperature of steel components to get to amongst nonmetallic materials.
            (1). Any market of insert welding material connection.
            Such as: Cutting instruments ( Turning, Milling cutter, Woodworking equipment, Serrated blade, Shoe materials, Diamond instrument, Deep gap drilling, Drilling and many others.), Faucets, Bathroom add-ons, Showers, Coal drill, Drill little bit, Terminal blocks, Furniture fittings, Refrigeration gear, Pad tube, Heating plate, Egg beater, Lighting add-ons, Branch distributor, Bicycle up and down the fork iron, Copper pieces, Aluminum, Stainless steel.
          (two). Do not include welding material connection.
            Such as: Pc radiator main and copper core, Motor rotor and shaft, Horn net preparetions, Hanger hook, Copier carbon brush melt, Aluminum-plastic pipe, Compound preparetions kettle, Resource shank remedy, Tableware curing rubber deal with, Battery pole ear forming, Aluminum foil sealing etc.

      Package:

      Company Informations:

          HangCZPT CZPT Electromechanical Device Co.,Ltd., founded in 1996, which is engaged in R&D, 
      production andsale of solid Induction heating machine professionally. Many senior professionals of induction heating products gathered listed here, who initiate the induction heating equipment with environmental protection and highly successful energy conservation, positively and diligently. 

       

      Our Providers:

      one. Pre-sale service:

      • CZPTmmend the most suitable machine for customers, according to their requirements. 
      • Inquiry and consulting support. 
      • Sample testing support. 
      • View our Factory.

      two. In-sale service:

      • Strictly manufacture the machine, according to relevant technical standards.
      • Take run test, according to relevant equipment test run regulations.
      • Strictly check up the machine, before delivery
      • Delivery on time.

      3. After-sale service:

      • 12 months warranty period
      • Within one year free warranty, any fault caused by non-artificial reason, any quality problems such as design, manufacture, or procedure occurs, CZPT shall provide replacement parts after detecting the faults.
      • If any big quality problems occurs out of the guarantee period, CZPT will send maintenance
      • Technician to provide visiting service after checking with the customer and charge for a favorable price. 
      • CZPT will provide a lifetime favorable price to the buyer with the materials and spare parts used in system operation, equipment maintenance.
      • The above mentioned are only basic after-sale service requirements, we will make more promises related to quality assurance and operation guarantee mechanism.

      FAQ
      China Provides Induction Heating Electrical power Offer   
      Questions and Answers:

      one. Which countries your products are exported to?
      Our products are sold all over the world and with related certifications.

      two.How about the warranty?
      All our products have one year quality warranty, during the warranty time, the spare parts replacement is free. And we provide life long time technical support and other assistance.

      3.How to install your machine?
      We have paper installation instructions and videos, we will teach till you learn it.

      4. Which export port you use?
      Any China port, commonly we will use HangCZPT ,HangCZPT ,Hongkong port, it can appoint as you like.

      5.How about the payment terms and delivery time ?
      Payment terms for little machines: a hundred% T/T/ Western Union/Funds in progress.
      The huge equipment and huge sum: thirty% deposit,70% before shipment (we will shoot total delivering process for customer’s confirmation)and the related papers. You can pay by T/T,L/C, Western Union or other ways.
      The small machine delivery time is within 7 days, the bigger one takes about 15days,we will delivery goods on time.

      6.If I have paid but can not receive the goods, how should I do?
      Alibaba international website is a famous trade platform and has been mature those years ,every supplier on it has paid large integrity fund,and we have Chinese business licenses which can be checked on China official website or we can show it to you,so that situation will never appear, please be assured.

      seven.Is your goods has CZPT or CE certificate ?
      Sure, all our goods has ISO and CE certification. All machines are high top quality goods.

      8.What is your nature of your company:dealer or manufacturing unit ?
      We are manufacturer and have a big factory ,warmly welcome to visit our factory and speak to us. 

       

       

       Ultrahigh Frequency Series JLCG (100KHZ-1.1MHZ)

      Model JLCG-3 JLCG-six JLCG-10 JLCG-twenty JLCG-thirty JLCG-40 JLCG-60 JLCG-one hundred
      Enter electrical power desire Solitary stage 220V  50/60HZ 3 stage 380V  50/60HZ
      Oscillate electricity max 3KW 6KW 10KW 20KW 30KW 40KW 60KW 100KW
      Max enter current 14A 28A 20A 32A 45A 60A 90A 152A
      Oscillate frequency .five-1.1MHZ .2-1.1MHZ two hundred-500KHZ 50-250KHZ 50-200KHZ fifty-200KHZ fifty-150KHZ 50-150KHZ
      Cooling h2o want >0.2MPa  two-6L/Min .3Mpa≥6L/MIN .5Mpa≥6L/MIN
      Obligation cycle 100% 40°C
      Web excess weight 15kg 25kg 30kg 25kg/15kg 30kg/20kg 35kg/25kg 45kg/35kg 60kg/40kg
      Cable length two-6(Meters)

      Portable 40kw Induction Heating Machine Induction Heater

      Gear Motor

      As one of the gear motor manufacturers, suppliers, and exporters of mechanical products, We offer gear motors and many other products.

      Please get in touch with us for details.

      Manufacturer supplier exporter of gear motors.

      Recent Posts